HTE immersion heater, paired with a 5T gas-fired insulated furnace, serves automotive heat exchanger manufacturers, enabling precise rising temperature of molten aluminum within 20 minutes- Zhejiang Shangguijuli Special Material Technology Co., Ltd.

HTE immersion heater, paired with a 5T gas-fired insulated furnace, serves automotive heat exchanger manufacturers, enabling precise rising temperature of molten aluminum within 20 minutes.

This manufacturer specializes in the production of automotive radiators, intercoolers, and oil coolers. Under the condition that the aluminum melt is maintained at 700°C, the gas-fired furnace can only reach 680°C at full load; however, the integration of HTE enables the original 5T gas-fired heat preservation furnace to achieve rapid and precise temperature rise.

▍SGJL boasts a comprehensive and professional technical team, enabling manufacturers to elevate their temperature limits through customized solutions that raise the operating range from 680°C to 700°C.

▍High quality meets stringent requirements; its high-power output enables the system to reach the set temperature within 20 minutes, ensuring that rapid heating is no longer a challenge for our customers.

▍Over a 25-hour monitoring period, the electricity consumption per unit was 2.7 kWh/h; this achieves greater energy efficiency, enhanced environmental sustainability, and improved operational precision while fulfilling decarbonization objectives.

Since its procurement in 2021, the maximum service life of HTE heaters has approached three years, significantly exceeding that of conventional heaters.